Back to the product list

BCT Series Beam Clamps

1-10 metric ton CapacityBeam Clamps provide a temporary or permanent mount to a wide range of tapered or flat beams.

  • They are the ideal rigging device for lifting, pulling or suspending loads.
  • These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
  • Quick and simple installation is achieved without tools.
  • Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
  • The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.


Model Specifications